Everyone knows that wardrobe should be placed away from heat sources. As for cleaning, the editor has collected a few tips for you to clearly understand that cleaning a wardrobe is also a simple thing. In addition to paying attention to the cleaning of the wardrobe itself, you should also pay attention to the overall dryness of the room and not be too wet to avoid moisture from the cabinet.
The secret of longevity of the overall wardrobe: Use tools to clean the wardrobe
part1: Use tools to remove dust from the wardrobe to pay attention to the cleaning and maintenance of the surface of the wardrobe. There should be no debris or dust in the track. When cleaning, you can use a semi-wet rag to wipe the cabinet body and cabinet doors, and do not use corrosive detergents. The dust on the track can be cleaned with a vacuum cleaner or a small brush, and the metal parts such as cabinet racks and tie rods are wiped with dry cloth.
When cleaning, do not let cleaning tools touch the wardrobe to avoid scratches from hard objects. It should prevent heavy objects and sharp objects from hitting the tracks, cabinets and door panels. The edge sealing of the cabinet should not touch water and other liquid solvents to prevent the edge sealing from falling off.
When there is dust on the surface of the wardrobe, a feather duster or a soft cloth should be used to remove the dust. If there is stain on the surface, you can consider using an appropriate amount of neutral detergent or soapy water with a wet cloth to wipe it, or use sand wax to rub it and remove it. Do not use corrosive detergents.
part2: Hardware parts cannot be ignored
The connectors of the wardrobe should be inspected regularly, and tightened in time after they are found to be loose, and a small amount of lubricating oil should be injected. If there is a malfunction due to disassembly and assembly or combination, the wardrobe after-sales personnel should be notified in time to assist in the handling. Metal parts such as cabinet racks, pull rods, etc. can be wiped with a soft cloth. Do not use chemical detergents or acidic liquids to clean them.
It is normal for light rail door pulleys to make noises after long use. In order to ensure that the pulleys are long-lasting, smooth and silent, please add some lubricant along the upper and lower pulleys every 2-3 months.
When using sliding doors, be sure to check whether the handle is protruding. If there is protruding, press it flat first, otherwise it will damage the side cabinet or handle.
part3: The indoor environment should be ventilated
The indoor environment should be kept ventilated and dry. Regularly maintaining indoor ventilation can allow the humid air in the room to be exchanged with the outdoors, and the chemicals in the wooden wardrobe can be evaporated to the outdoors as much as possible. It is common to open windows or doors frequently to make the air convection or use an air conditioning system and ventilation system.
Avoid direct sunlight. Try to avoid long-term exposure of outdoor sunlight to the entire or part of the wardrobe. It is best to place it in a place where the sunlight can be exposed, or use transparent gauze curtains to separate direct sunlight.
part4: The wardrobe should be placed smoothly
The wardrobe should be placed smoothly to ensure the use function of the wardrobe and prevent damage to the wardrobe structure. If the wardrobe is often in a shaking and unstable state after being placed, the fasteners will be loosened over time, the tenons or connections of the bonding parts will be loose, and the bonding parts will be cracked, affecting the service life of the wardrobe. If the ground is uneven, be sure to plaster the legs of the wardrobe.
Precautions for long-term protection of the wardrobe. Place camphor and tobacco leaves in the wardrobe to prevent monts and cockroaches, and put some peppercorns to prevent mice.